Select Page

The art of working with wood has so much to offer. From the very skilled woodworkers who do woodworking for a living or the weekend woodworker who does it just for fun, there is something for everyone. If you are looking to get into doing more woodworking, then keep reading to learn more.

Don’t neglect sanding your wood. Sanding may be tedious, but the quality of your workmanship will suffer if you leave the scrapes and nicks where they are. Not to mention, those scratches and nicks absorb more stain and paint, making them stand out more, and making your work look shoddy.

Organize your shop’s extension cords to keep your shop safe and tidy. You can make your own cord keeper with nothing more than a scrap piece of wood. Simply cut a piece of wood in the shape of an I and wrap each of your extension cords around the wood.

When you are working on a project, be sure to face your light directly on your working area. The bright light will enable you to detect any drips or runs you may not see otherwise. Missed areas will also be more visible. Be sure to always work in a well-ventilated area as well.

Dust can ruin the finish of any woodworking project. Keep dust away from your projects and workbench by vacuuming it up. If you blow or brush it away, it will just land somewhere else, likely back on your project. Also, use a damp cloth to wipe all surfaces before you begin top-coating, or staining.

Always know the specific characteristics of the wood you are working with before you begin a staining project. Paint grade indicates that the wood is not of high quality, while stain grade indicates that the wood has a grain pattern that is suitable for staining wood. Veener and particleboard are different too; particleboard may absorb too much stain, and veener may not absorb enough. The proper type of wood will ensure that your project will turn out as planned.

Take advantage of several tools instead of trying to do all of your work on just one. A jig, a tablesaw, a bandsaw and a lathe all have their own uses. It is important that you know what each of these tools do and you use them accordingly while getting the job done.

A golf tee can fix loose door hinges. Remove the door and hinges from the frame and tap the golf tee into the hole. Cut the extra golf tee off and install the door again. This gives the screw a more solid base to grip into.

Look all over the Internet, local garage and estate sales to find great deals on items you need for woodworking. Buying used can help you save a lot of money. This is a great way for people to get started with woodworking or to replace tools that have worn out.

Never cut any pieces of wood without checking for nails, screws and other metal. While donning a pair of goggles keeps your eyes protected, you are still at risk for other injuries. Inspect every piece of wood whether you are re-purposing it or using new lumber. You are better safe than sorry with this safety tip, and checking the boards only takes a few minutes of your time.

 

You may enjoy drinking a beer while you are doing woodworking. However, drinking and working with saws is a terrible idea. Don’t work on anything if you are drinking. The same goes with using prescription or illegal drugs.

When wiping excess stain off wood, wipe in the direction of the grain. Otherwise, the stain will just lay on top. Not only does this ensure that the stain is getting all the way into the grain, it will show off the grain of the wood to its best advantage.

For a beginner, sometimes it is best to buy kits instead of cutting the entire project yourself. You should be able to finish your project quicker with a precut kit. These kits will help you gain some valuable insight on the steps involved in a project so that the next time you can do it all yourself.

When you are applying a finish to your completed project, make sure you work in a dust free environment. It is important to sand the wood of your project before applying varnish or paint, and sand it between coats with fine sandpaper. Use extremely fine steel wool before applying the final coat of finish.

Go to the art supply store and get a drafting square. Carpenter squares are a hassle, and drywall squares are notoriously inaccurate. When you need an exact square several feet in width and length, a drafting square is a surefire winner. Once you use it a few times, you’ll likely use it just as much as a tape measure.

If you want to stain your wood piece, make sure to use a finer grit sandpaper if you want a lighter color. That is because the big scratches left by coarse paper allows more of the pigments to saturate the wood surface. Therefore, if you want the color to be lighter, make sure you’ve sanded with fine sandpaper.

Every good woodworking shop needs a quality combination square. It is needed for almost every job you’ll tackle. It makes a good depth gauge, using the straight side. It is, of course, perfect for miter cuts. Most have a level built right in. A good combination square is a must-have tool, right up there with a hammer and drill.

Before beginning any staining project, test the stain in an inconspicuous location. Different types of woods absorb stains differently and can change the color of the stain on the finished project. By doing a test spot first, you can ensure that your finished woodworking piece will look beautiful when stained.

Working with wood has always been a valuable skill since the beginning of time. It can be a lucrative skill or simply an enjoyable hobby. There is something for everyone to enjoy about woodworking. Hopefully the tips from above will help inspire you and encourage you to get into doing more woodworking today.