Select Page

Woodworking is difficult work. It takes a lot of skill, patience and knowledge to do the job right and create beautiful and useful items. It is also important to follow essential woodworking safety procedures. To learn more about woodworking safety and building sturdy, durable items, keep on reading this article.

Woodworking can be a fun, and satisfying, hobby. However, it is very important to play it safe when working with tools, substances that cause fumes and other common dangers of the craft. Be sure to wear safety glasses, allow plenty of fresh air for ventilation when using oil-based products and always read the directions before you start anything!

Organize your shop’s extension cords to keep your shop safe and tidy. You can make your own cord keeper with nothing more than a scrap piece of wood. Simply cut a piece of wood in the shape of an I and wrap each of your extension cords around the wood.

Familiarize yourself with the tools that you are going to use. This is a very important tip for the beginner, but even more advanced woodworkers can benefit from it too. Lay out the tools and make sure that you know the workings of each one. If you’ve got a brand new tool to you, spend the time that you need with it.

Be sure to keep your bandsaw clean at all times. It is best to have a duster on hand when you are doing the sawing for your woodworking project so that you can clean the saw after each time that you use it to cut wood. This will ensure that you can get a great cut every time.

When learning a new woodworking technique, practice it over and over again. Repetition is the best way to learn these skills. So find some cheap wood (scrap wood works), and go at it for some time to hone your skills. This will make it so you’re less likely to make mistakes during important projects.

One of the necessary tools for woodworking is the common pencil. Pencils do get lost easily, however. Buy plenty, then store them in an old instant soup container. Fill the container with sawdust and drill holes in the lid. You’ll now have plenty of pencils and the container won’t tip over easily.

A good method in laminating a wood project is by using tip snips to trip the laminate. They make cutting the laminate to the right sizes effortless. If you can, get yourself some tin snips and then reserve them for laminate only for the best results.

You should know how to work with wood while using hand tools as well as power tools. If you are doing one quick action, it may be in your best interest to use a hand tool, but if you are completing a larger task, power tools will save you a lot of time.

When you need accurate measurements in the 3-foot range, use a drafting square. These are relatively cheap and can be found at any art supply store. They are perfectly straight and extremely accurate. They are less cumbersome than a framing square and are also longer. This will become your go-to tool in your woodworking shop.

 

When you plan to do your woodworking project, make sure to choose the wood that is appropriate for the item. Soft woods can scratch easily and shouldn’t be used for a table. And keep in mind that different woods will have different colors at the end of it all.

Always disconnect the power of your power tools before you change blades or do any maintenance work on it. It is very dangerous to leave the electrical tool plugged in when you change blades. If the tool turned on, it would be a catastrophe. Always remember this tip to stay safe while woodworking.

Of the surface of the wood in your project has been dinged or dented by accident, you need to remove the blemish before you finish it. If the fibers of the wood are only crushed, not torn, you can use steam to fix the problem. Fill the depression with a drop or two of water and use a hot iron over a damp cloth to level the dent.

If you don’t want glue to stain the piece of wood you’re working on, it’s a good idea to use tape first. Clamp together the two pieces you want to glue, and then put tape on the joints. Then use a sharp knife to cut the piecs apart. That way, when you glue together your wood, excess glue will get on tape and not the wood.

Unless you are using an orbital sander, do not sand across the grain. Sanding with the grain is much more effective. It will also give your finished woodworking project a more professional appearance. Sanding is an important part of your project, and it is a good idea to get it right.

Always allow yourself enough time to do the job properly. If you rush, you will find that your quality of work suffers and that what you end up with isn’t what you expected. Instead, estimate how long it will take and then add another week, just in case problems crop up.

Priming is an essential part of any painting project. This is especially true when painting untreated lumber. To help you get the most beautiful results apply two coats of primer to your unfinished wood. Lightly sand between the coats of primer. Then finish your project by applying two or three light coats of oil-based paint for a beautiful finish.

Make sure you know all the steps you’ll have to complete to finish your project. It’s a painful experience to get half way through and realize you made a major error. Take the time to read over them a few times prior to beginning so that you do everything right.

As stated in the introduction, working with wood is not a simple thing. You not only have to have the right skills and knowledge about working with the popular material, you also have to practice safety procedures to stay safe. Use the information above to help you work well with wood.