Whether you are a professional woodworker, or just do it as a hobby, there is always good reason to take time to learn more about the skill. There are always new tricks that are discovered, as well as new tools to hit the market to make your work easier. If you want to learn more you need to read the article that follows.
If you would like to start woodworking as a hobby or a business, always buy the highest quality tools that you can find. While you may be able to find cheaper tools, they will end up breaking during your project. Spend the extra money and buy a quality tool that will last a lifetime.
In a pinch, you can use a hacksaw blade as a makeshift compass. Often you can’t find a compass when you need it in room, when you are away from your shop. You can quickly nail a hole in the middle of a hacksaw blade, then steady the pencil against the proper tooth to get the right length. Draw that circle.
Become more accurate by using a drafting square. If you need an accurate square that’s about 2″ to 3″, you have limited options. Drywall squares tend to be very inaccurate. With carpenter squares, you have to hook them onto your work piece’s edge. A drafting square can be easily used if you happen to have one lying around. If you don’t, they are pretty cheap to find at art stores. They are incredibly accurate and as useful as a tape measure.
Begin small with woodworking projects. It can be very exciting to get yourself ready for your first woodworking project, but don’t let your excitement overtake your smarts. Buy only what you need, no more for right now. Don’t fall for buying tools that you currently don’t need as you may find better alternatives in the future.
Take your time when using an electrical saw to cut your wood. If you are doing a woodworking project and try to do it quickly you are risking injury as well as are more likely to make a mistake. Be sure to not even try to start something if you do not have plenty of time.
Buy some scrap wood and use it to practice on. Scrap wood is really cheap, and it makes for great practice wood. Use it to try new skills that you’re learning. Practice with new tools on it. Make your mistakes here, not when it counts. You’ll be happy you did in terms of budget.
Check out the selection of videos available on YouTube if you would like to learn more about the hobby of woodworking. There are so many videos available from people of all skill levels that you will never be able to watch them all. You can even search for specific skills that you would like to learn.
If you have a high skill level when it comes to woodworking you may want to think about taking some time to share your knowledge with others. You can keep it simple by recording what you do step-by-step or you could take it to a higher level and teach a class.
Before you cut into a piece of wood, you need to inspect it to make sure there are not any pieces of metal in the wood. Screws, nails, staples and other metallic object will not only damage your blades, but also pose a safety hazard. Always inspect the wood before you cut.
Make sure you buy the right tool for the job. When you are building a wooden deck onto your house, it would be difficult to do all the cutting with a hand saw. Instead, you should cut with a circular saw. A circular saw is electric; however, a hand saw is not.
Only cut using sharp tools. Older and dull tools result in tear-outs and even chipping, which is frustrating and a waste of time. Sharp tools means you get clean cuts quickly. You’ll also spend a lot less time sanding things to get just the right look and fit that you need.
Do you know that different colored tin snips make different kinds of cuts? Tin snips with red handles are used for making left hand turns. Green handled tin snips are used for making right hand turns. Finally, yellow handled tin snips are used for straight lines and gradual curves.
If you use an orbital sander to smooth the surface of your project before finishing, move the sander very slowly. The recommended speed is one inch per second which is slower than most people sand. Going too fast can cause a small spiral pattern that does not show up until the finish is applied.
Get a tool actuated shop vac to do double duty in your woodworking shop. This handy innovation can help you keep your woodworking area clean and tidy as you work. With your sander or saw connected to you tool actuated shop vac, you will have continuous cleanup of dust and shavings as you work. This makes woodworking safer and more pleasant and cleanup quicker and easier.
When opting for a pencil, try using a mechanical pencil instead of other varieties. Mechanical pencils allow you to make more precise lines on your wood. This means more precise cutting and less mistakes down the road. Even choose mechanical pencils over pencils that are labeled carpenter’s pencils. They are still more precise.
Test the wood stain on a spot that is inconspicuous. The stain could appear different than you intended, or you might have issues applying it that you didn’t intend. Checking the stain in a hidden spot first can help you make the changes you need. This will mean less work in the long run.
As you read at the beginning of this article, there is always something new to learn about the field of woodworking, no matter how long you have been doing it. Now that you have read the article, you know that is true because you have surely learned something yourself. Now all you need to do is apply the tips so that they become part of your routine.