Woodworking is a very valuable skill to have and is also a form of art. The world of woodworking has many things to offer to those who enjoy it. Woodworking can be a job that pays well or it can simply be an enjoyable weekend hobby that is relaxing and creative.
Use stop blocks to your advantage for more accurate work. When cutting a lot of pieces the same size, no matter how carefully you measure, you often find small variations. Use a pre-cut stop block to make those measurements pinpoint accurate. Then the table saw will stop at just the right length length.
Do not make the mistake of buying woodworking supplies based on the price alone. This can turn out to be a mistake that will cost you more in the end. If the supplies you buy are not very good quality, they will wear out sooner than more expensive tools, which means you will have to replace them much sooner.
Make sure your workbench is the proper height. It really can make a big difference. It needs to fit you and how you work. Usually if you are around 5’6″ to 5’9″ you probably need one that is between 33″ and 36″ high. If you are 5’10” or taller, you may need one that is between 35″ and 37″ high. Use your bench at its current height to determine if you need to change it to work better for you.
Remember the quote, “Measure twice, cut once.” When it comes to cutting wood, you always want to ensure you have the right measurements before you begin cutting. Otherwise, you will have to buy more wood, which will cost you a lot of money. You can avoid this dilemma by ensuring proper measurements.
When you are new at woodworking and starting to collect your tools, purchase simple tools to begin with. Try your hand at a few projects to make sure you want to continue before you invest in expensive tools. You can save money and get better quality tools when you buy used tools.
When you find a nice level spot on your workshop floor for your table saw, it can be difficult finding the same spot after you put your saw away. When you do find a level spot, use duct tape on the floor so you know where to position your table saw next time you need it.
Keep your tools and hardware organized. When you keep clutter to a minimum, it does more than just add discipline to your workshop. It also keeps distractions, hazards and time spent hunting down a misplaced item to a minimum. Keeping screws, nails and other hardware and accessories in one place neatly stored until needed makes your projects faster and keeps you safer.
Never cut any pieces of wood without checking for nails, screws and other metal. While donning a pair of goggles keeps your eyes protected, you are still at risk for other injuries. Inspect every piece of wood whether you are re-purposing it or using new lumber. You are better safe than sorry with this safety tip, and checking the boards only takes a few minutes of your time.
When you are applying a finish to your completed project, make sure you work in a dust free environment. It is important to sand the wood of your project before applying varnish or paint, and sand it between coats with fine sandpaper. Use extremely fine steel wool before applying the final coat of finish.
Save time in the shop by locating the most level spot on your floor and marking it with a brightly colored duct tape. When you do this, you can quickly and easily maneuver your mobile table saw into position for board cutting. You will not have to check the level and make time consuming minor adjustments every time you want to cut a board.
Unless you are using an orbital sander, do not sand across the grain. Sanding with the grain is much more effective. It will also give your finished woodworking project a more professional appearance. Sanding is an important part of your project, and it is a good idea to get it right.
Buy quality tools. There are discount tools on the market, and you may be tempted to save some money. What is the difference? Sometimes the steel in a screwdriver is softer and can strip the screw heads. Sometimes the build quality is cheap and the head of a hammer may fly off. Spend the money for good tools and you’ll have them for decades.
Using a drafting square can help your accuracy when performing smaller cuts. If you need to cut wood accurately at the 2 to 3 foot range, it can be difficult to measure accurately. Carpenter squares are cumbersome and drywall squares are inaccurate. Instead you should go to an art store for your drafting square. They are easier to work with and more accurate.
Know how each of your woodworking tools works and the safety mechanisms on each. Nearly every tool has a safety mechanism built in to help keep you secure during usage. Knowing how they work can be the difference between an amazing experience and disaster, so learn all that you can before beginning.
Look online for free woodworking plans. Whether you want to build a bookcase, chicken coop, or garden shed, you can find free woodworking plans on the internet. Make sure you check the plans for completeness. Also, you’ll want to evaluate the plans to see if there are any changes you want to make.
Choose a woodworking project that interests you. There are almost an infinite number of possible woodworking projects you could do. Picking a project that interests you and that you can get excited about makes it more likely that you will finish the project. Starting small, with an indoor project, is a good way to get your feet wet.
As you know, there are many aspects to woodworking. It is a skill that can be used to earn a good living or it can be a simple pastime to enjoy during your spare time. But for whatever reason you choose to do woodworking, the tips above can help you to become even better.