If you’ve got a hankering to do do woodworking, you are in good company. Many people aspire to be excellent wood crafters, but few actually achieve that goal. Learning something new is always a bit intimidating, but this needn’t be. You can learn what you need to know to get started by reading the following article.

Anytime that you begin a new project you must consider your safety first. Make sure you know how to use power tools properly and always wear safety equipment. Always keep safety guards in place on power tools. The last thing you want to do is end up at the emergency room because of an accident.

Try creating your own reusable sanding blocks. Cut six blocks from some plywood that you have laying around for every piece of sandpaper that you use. Be certain they are approximately 2 1/2 inches by 4 1/2 inches. Spray some adhesive on your blocks and on the cork tile. Trim the cork so that it is flush around the edges of the block. Spray some adhesive on a sandpaper sheet and stick it on each cork block face down. Cut the sandpaper flush and label the block.

You should always test stain on a small area or on a wood scrap. This will help you to pick the right stain color for your project. Wood is unpredictable at times and you should do this test so that you aren’t disappointed by the results.

Use hot glue instead of clamps for little things. When cutting, filing, sanding, or finishing something small, use the hot glue gun to glue the piece to your pedestal stick. The glue holds holds just like clamps, if not better than clamps. It also works great for things that clamps will not work on. When you finish your project, loosen it gently with a putty knife.

Your woodworking shop needs a stair gauge. These are usually used for laying out stair jacks; however, you can also use it to clamp down your carpenter’s square. This will transform your carpenter’s square from a straight-line tool, into a straight guide for your saw. You can always make perfectly straight cuts by using this method.

When you need accurate measurements in the 3-foot range, use a drafting square. These are relatively cheap and can be found at any art supply store. They are perfectly straight and extremely accurate. They are less cumbersome than a framing square and are also longer. This will become your go-to tool in your woodworking shop.

When you are new at woodworking and starting to collect your tools, purchase simple tools to begin with. Try your hand at a few projects to make sure you want to continue before you invest in expensive tools. You can save money and get better quality tools when you buy used tools.

If you’re looking for that first woodworking project, how about starting with a simple box? In fact, that’s probably the most popular first woodworking project out there. Buy some cheap wood that you like, and design a box that could work around your home. Maybe it’s for writing utensils, or perhaps it’s for the kitchen? There are a lot of options.

Keep your tools and hardware organized. When you keep clutter to a minimum, it does more than just add discipline to your workshop. It also keeps distractions, hazards and time spent hunting down a misplaced item to a minimum. Keeping screws, nails and other hardware and accessories in one place neatly stored until needed makes your projects faster and keeps you safer.

Always check your tools before you begin using them. Woodworking with a faulty or overused tool can easily lead to a serious injury or destruction of your materials. To make sure that this does not happen to you take the time to thoroughly inspect your tools from top to bottom.

If you are new to woodworking, stick with a cheap and effective tool bag. Many of the tools to start with are under a couple hundred dollars and very easy to find and use for basic projects. These tools include a benchtop tablesaw, a jigsaw or sabre saw, a circular saw, a random orbit sander, a corded or cordless drill, a fixed-base or plunge router, and a pipe and small bar clamps.

When deciding on a woodworking project, make sure you know what tools will be required to finish the project. If you are missing a tool, you may have to stop in the middle of the project and never finish. Many tools are available for rent at home improvement stores, but some you may have to purchase. This purchase could bring you well above your budget.

Keep your woodworking tools well sharpened. Dull tools produce messy work and can be hard to use. Not only that, but it can injure you if you have to use excessive force to cut. A sharp tool gives you a cleaner and more efficient cut. You can really notice the difference.

Network with your peers. The workshop likely limits your contact with the outside world. There may be times when you get stumped on a project. Ask your peers for answers to questions, ideas or support. Someone will have dealt with your issue before and will have an answer for you.

The most important part of any woodworking project is safety. There are many sharp tools that need to be used and you should be very careful when using them. Find out the proper way to use these tools. If they are power tools, read the manual. If they are hand tools, have a professional show you how to use them properly.

Learn about the different type of wood and their characteristics. This will help you choose the right wood for your projects. For example, pine is a popular choice for common wood projects and furniture, but you have to be aware of the knots that can sometimes affect your cutting. A wood like maple has a smoother grain and less knots.

In summary, you can achieve your woodworking goals by applying the tips above. Keep learning about the craft, and soon you will be an expert. It only takes the desire and the time to hone your woodworking skills. Soon, you’ll be making anything your heart desires and having fun to boot!