Select Page


Tips For Making Woodworking Projects Easier And More Fun

Whether you are a professional woodworker, or just do it as a hobby, there is always good reason to take time to learn more about the skill. There are always new tricks that are discovered, as well as new tools to hit the market to make your work easier. If you want to learn more you need to read the article that follows.

Tape can be your friend when gluing stained wood together. Place the two pieces of wood together in a clamp and tape the seam before applying the glue. Carefully cut the tape along the joint and then separate the two pieces of the wood and apply the glue along the joint. Clamp together and allow to dry. The tape will keep the glue off the wood and is easy to remove once the glue is dried.

Clean your saw’s teeth before cutting lumber. To thoroughly clean your saw blade dip a shop rag into a little acetone and wipe the blade thoroughly. Additionally, using a piece of sandpaper that has a fine grit will remove any sap or gumminess from your skill saw’s cutting blades.

Clean your saw’s teeth before cutting lumber. To thoroughly clean your saw blade dip a shop rag into a little acetone and wipe the blade thoroughly. Additionally, using a piece of sandpaper that has a fine grit will remove any sap or gumminess from your skill saw’s cutting blades.

If you have a high skill level when it comes to woodworking you may want to think about taking some time to share your knowledge with others. You can keep it simple by recording what you do step-by-step or you could take it to a higher level and teach a class.

Be sure to keep your bandsaw clean at all times. It is best to have a duster on hand when you are doing the sawing for your woodworking project so that you can clean the saw after each time that you use it to cut wood. This will ensure that you can get a great cut every time.

You should know how to work with wood while using hand tools as well as power tools. If you are doing one quick action, it may be in your best interest to use a hand tool, but if you are completing a larger task, power tools will save you a lot of time.

When you find a nice level spot on your workshop floor for your table saw, it can be difficult finding the same spot after you put your saw away. When you do find a level spot, use duct tape on the floor so you know where to position your table saw next time you need it.

When buying wood for your woodworking project, always buy long and not to the exact measurements. Some stores will sell you wood that is cut to length. Always measure long and trim down to the exact size you need in your shop. This way if you made a minor error in measurement, you will have a little bit of extra wood to cut off or utilize to make up for the difference.

When you are tackling the sanding portion of your woodworking project be sure that you are using the best type of sandpaper. There are many different types available, and using the wrong type can lead to your project being ruined. If you are not sure you are using the right type you can find the correct information online with the click of a few buttons.

You make mistakes. Always remember that, but never say it. You have made mistakes in the past, you are going to make them in the future. Always treat them as learning opportunities. However, never point them out to others or talk about them. Others may not notice, or even care. They’re likely to just be impressed you did something they couldn’t.

Wood is an expensive material to work with. It becomes really expensive when you are working on larger projects. Save some money by using cheaper and less attractive woods for areas of the project that are not on display. Save the high quality wood for the structure, tops and front of the project.

It is possible to put a water-based finish on top of an oil-based stain. However, you must wait a full twenty-four hours for the mineral spirits to fully evaporate from the oil-based stain. If the weather is wet or cold, it is better to wait another twenty-four hours before applying the finish.

Be certain that your woodworking power tools are in tip top shape before you begin working. Your saw blades and drill bits should be perfectly sharp and installed properly. If you try to use a saw blade or drill bit that is dull or slightly askew, you are sure to run into problems that could be quite dangerous. Additionally, using less than optimal equipment can only detract from the efficiency and accuracy of your work.

Develop good safety habits when beginning your woodworking hobby. It is easy to disregard safety, thinking that it doesn’t really matter if you wear safety glasses, for example. You’ll change your mind the first time you sustain an injury while doing something you enjoy. So start right – think safety!

As you already know, woodworking is a very valuable skill. Whether you are building a big projects such as a house or smaller projects such as a small bird house, woodworking has so much to offer. Hopefully the tips from above have given you ideas on new ways to use this valuable skill.

Listed Price: $55.18
Sale Price: $45.99

IRWIN Tools Clamping Set, 6-Piece features two 6″ Mini One-Hand Bar Clamps with double locking swivel jaws that have removable non-marring full-face pads to protect work surfaces and One-Handed Quick-… Read more…

      Read more . . .