Select Page


How To Put Your Workworking Skills To Practice

Woodworking is a craft like no other. You get to work with one of nature’s most useful resources and make something with your mind and hands. Whether you do this personally as a hobby, professionally for money or are just reading about it as a future possibility, this article has tips you can use to be a better woodcrafter.

Reusable sanding blocks save you time and money. To make them all you need is a few pieces of scrap lumber. Cut a piece of 2×4 into a rectangle approximately 2 inches wide and 4 inches long. Cut a piece of sandpaper the size of your block. Then, spray one side of the piece of lumber with spray adhesive and adhere the sandpaper to the block of wood.

Using a good wood glue can make joined pieces even stronger than the wood itself. The key to strength in a glued joint is the amount of time the glue takes to set. Glue that takes longer to cure is better than quick setting glue. Slower setting glue has more time to penetrate into the fibers of the wood, which enhances the strength of the joint.

Glue can cause nasty stains on your finished work. You can eliminate stains easily using a piece of tape. First, clamp your wood together without any glue. Put a piece of tape over the joint. Cut the tape on the joint with a sharp knife. You can now clamp the wood together with glue and any excess will ooze onto the tape, not the wood.

Learn how to find the center in a piece of firewood every time. Mount some flat scrap wood to the lathe’s faceplate. Attach an acrylic piece to it using some double-faced tape. Chuck that in your lathe. Turn your acrylic to a disc. Using a 1/16″ bit in your tail stock chuck, drill a hole through that center-point. Scribe some concentric circles on to the disc at 1/2″� intervals using a skew chisel. Position this center-finder over the end of your stock and adjust it until one of your circles is inscribed completely in a portion of the wood that is solid and usable. Using an awl or nail set, mark your center through the central hole in the disc.

Plan out your project and go over it a few times before you start. This will help prevent you from making mistakes that will ruin your project. You do not want to start it all over again, so plan it out well before you cut, screw or nail anything together.

Make sure that you are wearing the appropriate protective gear when you are working on your woodworking projects. Your safety is of primary importance. Eye protection can protect your eyes from flying wood debris. A pair of strong gloves can protect your hand from splinters. Make sure that you have these essentials before you start on any projects.

Check around your town for free wood scraps. Lots of businesses have pallets they do not need and are willing to give them away for free. Look online and you can find a million uses for old wooden pallets. Some people make furniture out of them. Be thrifty.

Make accurate lines and measurements by using a drafting square instead of a drywall square, yardstick or ruler. Drafting squares are smaller and easier to manage and are much more accurate than any of these tools. This is a handy tool to keep at your side because it is smaller. Additionally, drafting squares are very affordable, selling for about five bucks at any art supply store.

You can see that woodworking is a very diverse skill. It takes skill to make items like baseball bats, bookshelves, bowls or a multitude of other wood projects. Don’t feel like you must be greatly talented to work with wood. With the right ideas like this article showed you, you can be creative and successful when working with wood.

Listed Price: $4.05
Sale Price: $2.53

It is a good gift for your lover,family,friend and coworkers Material: Stainless Steel Color: Show as picture Size(Length*Width): Approx 6.3*5.8cm/2.48*2.28” Package Included:1 x Multi-Tool… Read more…

      Read more . . .